Plain Sleeve Thrust Washers

It is manufactured using the powdered metal process with the purest metal powders. This process ensures the uniform distribution of pores between the bronze particles which absorb the oil by capillary action. In addition, Bost-Bronz® has a self-contained oil supply (approximately 20% by volume) which provides a uniform protective film over the entire bearing surface. As a result, bearings are one of the most effective bearings available for precision performance.
bearings are also highly versatile and can be used for production and replacement requirements throughout general industry. They have proven to be efficient under heavy loads at moderate speeds, as well as under light loads at high speeds. In addition, they are ideally suited for applications where normal lubrication is difficult or impossible to provide.

Bearing Number	Bore Dia	Outer DIa	Width	Size
Symmco ST-3252-8 Plain Sleeve Thrust Washers	48.4 mm	200 °C	36.95 mm	19mm
Oilite TT1503- Plain Sleeve Thrust Washers	61 mm	140 mm	20 mm	100 °C
Oilite TT1603- Plain Sleeve Thrust Washers	0.17	0.169	5	1
Oilite TT1701- Plain Sleeve Thrust Washers	Ball	2.5 mm	Metric	5.118 Inch \| 130 Mil
Symmco ST-2444-8 Plain Sleeve Thrust Washers	6.65 kN	17 mm	43.5 mm	12.8 kN
Symmco ST-2038-2 Plain Sleeve Thrust Washers	222 kN	334 kN	1/4 NPT	359.999 mm
Symmco ST-5078-4 Plain Sleeve Thrust Washers	49.2 mm	100 °C	95 mm	44.45 mm
Symmco ST-5684-4 Plain Sleeve Thrust Washers	T213-	26 mm	41mm	32 mm
Symmco ST-3660-4 Plain Sleeve Thrust Washers	150 mm	19 mm	30mm	3.97 mm
Oilite TT709-01 Plain Sleeve Thrust Washers	Ball	ABEC 1 \| ISO P0	8482.10.50.68	4 Hz
Symmco ST-6284-4 Plain Sleeve Thrust Washers	5.5 Nm	100 °C	1 mm	24.5 mm