Bunting Bearings, LLC EF071012 Plain Sleeve & Flanged Bearings

s1:25.8 mm; L:143 mm; Z:33.5 mm; e:22 mm; Recommended tightening torque for set screw:16.8 Nm; A2:54.6 mm; B:51.6 mm; T min.:-20 °C; G:M6x1; A:40 mm;

Designation of bearing:EX210-31G2T04; A1:16 mm; Weight:2.74 kg; C:35.1 kN; s1:42.9 mm; P:300 mm; L:149 mm; H1:102 mm; SW:3.97 mm; B1:62.7 mm;

Brand:NTN; Characteristic outer ring frequency, BPF0:5.12 Hz; Radial clearance class:CN; d:40 mm; Characteristic rolling element frequency, BSF:6.66 Hz; Characteristic inner ring frequency, BPFI:6.88 Hz; B:15 mm; da min:45 mm; Characteristic cage frequency, FTF:0.43 Hz; ra max:1 mm;

L1:32 mm; Z:104.5 mm; Designation of housing:PAE211N-; H:64 mm; d:55 mm; Designation of bearing:ES211G2; T min.:-20 °C; N:M16; Recommended tightening torque for set screw:22 Nm; H1:16 mm;

s1:21.45 mm; A1:12 mm; B:42.9 mm; P:230 mm; A2:30 mm; Recommended tightening torque for set screw:8 Nm; H:102 mm; Designation of housing:T207-; H2:64 mm; N:22mm;

Mass:0.56 kg; D:90 mm; Fw:58 mm; Brand:NTN; Max operating temperature, Tmax:120 °C; C:22.7 mm; Nlim (grease):2,600 rpm; C0r:66 kN; Cr:31 kN; Precision class:P0;

Speed Rating-Single and Double Sealed Grease SDG:13000 rpm; Old MRC Bearing Number:202FS; Basic Interchange BCA:8502; D:35.0000 mm; Basic Interchange FAF:202KL; Width - Overall B:12.7 mm; Width - Inner Ring B1:12.20 mm; Fillet Radius ra:0.64 mm; Basic Radial Load Rating-Dynamic DC:7610 N; Basic Inte

A1:36 mm; T max.:100 °C; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN; Z:24.4 mm; N:17mm; L1:62 mm; Weight:3.18 kg; Designation of bearing:UC209-26G2T04; Designation of housing:PH209N-;

s1:11 mm; A1:10 mm; L:86 mm; T min.:-40 °C; N:11,5mm; C:9.55 kN; e:19 mm; d:15.88 mm; Designation of housing:FE203N-; A:29.5 mm;

C:14 kN; Weight:1.19 kg; L:140 mm; Designation of bearing:ES205-15G2T04; A1:24 mm; T max.:100 °C; T min.:-40 °C; H:80 mm; d1:37.4 mm; N:13mm;

rs min:4 mm; f0:13.6; Min operating temperature, Tmin:-60 °C; Characteristic cage frequency, FTF:0.39 Hz; Material - Ball:Steel; Precision Class:ABEC 3 | ISO P6; D:300 mm; Contact Angle:0 Degree; Other Features:Single Row | Deep Gr; Flush Ground:No;

J:225 mm; C0:49.5 kN; A2:88.8 mm; S:37.3 mm; A1:22 mm; C:66 kN; Recommended tightening torque for set screw:22 Nm; N:23mm; Designation of bearing:EX215G2T20; B1:92.1 mm;

d:60 mm; J:114 mm; L:150 mm; C0:32.8 kN; H:69.9 mm; C:52.5 kN; Designation of housing:PA212N-; N:M16; B:33.4 mm; H2:138 mm;

G:M6x1; T min.:-20 °C; H:250 mm; C:52.5 kN; A1:18 mm; e:29 mm; d:60.32 mm; Designation of housing:FL212N-; J:202 mm; N:23mm;